Connect to the Test Lab from everywhere

  LAN-SDS Lite

Test Lab

 

  • Connect your Radio Terminal to the Test Lab via VPN

What to test:

  • Attach and test your THR880i, THR9(i), TH9, TH1n, TMR880i Device.
  • Test Messaging in DMO or DMO Repeater Mode or TMO
  • Send an Alarm => so Unit Alert to a  ISSI or GSSI
  • Send a Status or Text Message and check whether your HEX to Text Convertion works
  • Radio B send a Message to Radio A which is attached to LAN-SDS. Check whether you can read this Message on your Remote Location.
  • Check whether Messages and Status Messages can be sent amd received using LAN-SDS

info@at-commands.tetraterminal.com

Connect  to LAN-SDS Lite Version- Think about how you want to connect to the Radio Terminal.

You can choose. There are lot of Options you or others can connect.

LAN-SDS
uses the Datacable attached to the Radio Terminal as
as  TCP-IP Interface

OPTION – Without Internet  ( and Software Solution)

  • Connect locally via Data Cable and IP to TCP Converter Tool PiraCom using your local LAN IP Address and the TCP Port of your choice
  • Connect locally via Data Cable and IP to TCP Converter Tool PiraCom using your Localhost IP Address 127.0.0.1 and the TCP Port Address  of your choice

OPTION – With Internet  ( and Software Solution)

  • Connect locally via Data Cable and IP to TCP Converter Tool PiraCom using your local LAN IP Address and the TCP Port of your choice – Use VPN to connect from remote.  Means you can connect from remote using a  LAN IP Adress Connection to the TCP Port of your choice

OPTION – Without Internet  ( and Hardware Solution)

  • Connect local via Data Cable attached to Perle IOLAN Hardware Converter which is a Hardware IP to TCP Converter . So connect to this Device and the Tetra Radio Terminal using a LAN IP and TCP Port of your choice

OPTION – With Internet  ( and Hardware Solution)

  • Connect local via Data Cable attached to Perle IOLAN Hardware Converter which is a Hardware IP to TCP Converter . So connect to this Device and the Tetra Radio Terminal using a LAN IP and TCP Port of your choice by using inbuilt VPN Server.

OPTION – Without Internet  ( Provider Solution )

  •  buy a P2P or P2MP Ethernet Connection ( expensive but secure ) because it is Provider Location A works with Location XY that works without internet

OPTION – Without Internet  ( Provider Solution )

  •  buy a VPN with LAN Routing as like a P2P or Hub and Spoke Multipoint   Connection ( expensive but secure )

Another  OPTION

a) Risky Option – open TCP Port or your LAN  -> less Risky  ( turn Internet off )

b) Risky Option – open TCP Port or your Router -> not recommended ( turn Internet on)

c) Establish a LAN Connection f.ex. by P2P  beam radio resp. license free radio relay systems.

Professional Equipment: -> Perle IOLAN Device Hardware Converter or just do it yourself

  • Conclusion: The Medium to connect to IP / TCP – Port is of your choice
  • Conclusion: You can use lot of Options to connect local(ly) or via remote
error: Content is protected !!